검색어
페이지1/1335 [26698]
확인

간략형으로보기

Limit to
연구논문(26,698)
1
3D-printed versatile biliary stents with nanoengineered surface for anti-hyperplasia and antibiofilm formation

3D-printed versatile biliary stents with nanoengineered surface for anti-hyperplasia and antibiofilm formation

  • 연구자 이현;원동성;박신우;박유빈;김지원;한기남;나유현;강민호;김석범;강희민;박준규;장태식;이상진;박수아;이상수;박정훈;정현도
  • 발행처 Elsevier;Elsevier
  • 발행년 2024.03.21
4
.=Acoustic Waves Generated in Hypergolic Drop Tests of Low- and High-Volatility Fuels

.=Acoustic Waves Generated in Hypergolic Drop Tests of Low- and High-Volatility Fuels

  • 연구자 강홍재;김충만;이종광
  • 발행처 AIAA(American Institute of Aeronautics and Astronautics);AIAA(American Institute of Aeronautics and Astronautics)
  • 발행년 2024.03.02
5
Adiabatic compressed air energy storage system combined with solid-oxide electrolysis cells

Adiabatic compressed air energy storage system combined with solid-oxide electrolysis cells

  • 연구자 김영민;김선엽;최지선
  • 발행처 Elsevier Limited;Elsevier Limited
  • 발행년 2024.01.06
6
Advancing waste heat potential assessment for net-zero emissions: A review of demand-based thermal energy systems

Advancing waste heat potential assessment for net-zero emissions: A review of demand-based thermal energy systems

  • 연구자 오진우;한욱민;정유준;강용태;이호성
  • 발행처 Elsevier BV;Elsevier BV
  • 발행년 2024.06.22
7
Analysis of deformation of thin polyimide film by pre-strained silicone elastomer

Analysis of deformation of thin polyimide film by pre-strained silicone elastomer

  • 연구자 Falguni Ahmed;신승민;송준호;김정엽;박아영;홍문표
  • 발행처 Elsevier BV;Elsevier BV
  • 발행년 2024.03.01
8
Atomic layer Control of MoS2 by Three Mixed Gas Plasma by RIE

Atomic layer Control of MoS2 by Three Mixed Gas Plasma by RIE

  • 연구자 강민지;김창민;김무영;김성호;강우석;김태성;김형우
  • 발행처 KVS, KIMS;KVS, KIMS
  • 발행년 2024.01.17
9
Biomimetic mineralization of 3D-printed polyhydroxyalkanoate-based microbial scaffolds for bone tissue engineering

Biomimetic mineralization of 3D-printed polyhydroxyalkanoate-based microbial scaffolds for bone tissue engineering

  • 연구자 김다홍;이수정;이동진;석지민;여선주;임형준;이재종;송재황;이강원;박원호;박수아
  • 발행년 2024.01.16
10
BMP-2-immobilized PCL 3D printing scaffold with a leaf-stacked structure as a physically and biologically activated bone graft

BMP-2-immobilized PCL 3D printing scaffold with a leaf-stacked structure as a physically and biologically activated bone graft

  • 연구자 김민지;박진호;석지민;정지운;황태성;이희천;이진호;박수아;변준호;오세행
  • 발행처 IOP Publishing;IOP Publishing
  • 발행년 2024.02.09
11
CCTV 장면에서의 물피도주 차량 탐지 자동화 시스템=CCTV-based hit-and-run car detection automated system

CCTV 장면에서의 물피도주 차량 탐지 자동화 시스템=CCTV-based hit-and-run car detection automated system

  • 연구자 유용현;김민우;김유현;안병태;최동걸
  • 발행처 (사)한국로봇학회, 한국로봇산업진흥원;(사)한국로봇학회, 한국로봇산업진흥원
  • 발행년 2024.02.23
13
CO2 microbubbling system for lithium carbonate precipitation=CO2 microbubbling system for lithium carbonate precipitation

CO2 microbubbling system for lithium carbonate precipitation=CO2 microbubbling system for lithium carbonate precipitation

  • 연구자 윤홍식;전성범;민태진;김성환;박준우;김아름;임성일;류경하
  • 발행처 대한환경공학회;대한환경공학회
  • 발행년 2024.06.05
14
Comparative Analysis of Integrated Filtering Methods Using UWB Localization in Indoor Environment

Comparative Analysis of Integrated Filtering Methods Using UWB Localization in Indoor Environment

  • 연구자 Rahul Ranjan;신동규;정윤식;김상현;윤종환;김창현;이승재;계중읍
  • 발행처 Multidisciplinary Digital Publishing Institute (MDPI);Multidisciplinary Digital Publishing Institute (MDPI)
  • 발행년 2024.02.06
15
Comparison and Identification of Optimal Machine Learning Model for Rapid Optimization of Printed Line Characteristics of Aerosol Jet Printing Technology

Comparison and Identification of Optimal Machine Learning Model for Rapid Optimization of Printed Line Characteristics of Aerosol Jet Printing Technology

  • 연구자 Zhixin Liu; Shuai Yin;최준필; Haining Zhang;Mingdong Li
  • 발행처 한국정밀공학회(KSPE);한국정밀공학회(KSPE)
  • 발행년 2024.01.01
16
A Comprehensive Investigation of Process Parameters and Material Properties Effects on Printed Line Quality of Aerosol Jet Printing Based on Coupled Three-dimensional Numerical Models

A Comprehensive Investigation of Process Parameters and Material Properties Effects on Printed Line Quality of Aerosol Jet Printing Based on Coupled Three-dimensional Numerical Models

  • 연구자 Zhixin Liu;Yebao Liu;Lewei He;Lin Cui;Nannan Liang;최준필;Haining Zhang
  • 발행처 한국정밀공학회;한국정밀공학회
  • 발행년 2024.05.01
17
.=Conceptual demonstration of a modular fabrication method for an engineering model of a small monopropellant thrusters

.=Conceptual demonstration of a modular fabrication method for an engineering model of a small monopropellant thrusters

  • 연구자 이정락;김성현;류지호;강홍재;이안나
  • 발행처 Pergamon Press Ltd.;Pergamon Press Ltd.
  • 발행년 2024.03.21
18
Conductivity and Flexibility Enhancement of Aerosol-Jet-Printed Sensors Using a Silver Nanoparticle Ink with Carbon Nanotubes

Conductivity and Flexibility Enhancement of Aerosol-Jet-Printed Sensors Using a Silver Nanoparticle Ink with Carbon Nanotubes

  • 연구자 Haining Zhang;Seung Ki Moon;정민교;이필호;하태호;최준필
  • 발행처 Polish Academy of Sciences;Polish Academy of Sciences
  • 발행년 2024.04.01
19
Continuous and self-charging electricity generator based on saltwater=Continuous and self-charging electricity generator based on saltwater

Continuous and self-charging electricity generator based on saltwater=Continuous and self-charging electricity generator based on saltwater

  • 연구자 하현호;장윤선;성주환;이지연;소혜미;이진영;이혜신;정수환;현승민
  • 발행처 Elsevier BV;Elsevier BV
  • 발행년 2024.05.15